Drain-All has "throughport design" for more throughput capacity of solid debris. This is the standard condensate trap in the line. It fits most industrial applications and compressors up to approximately 1500 HP depending on the ambient conditions as well as other factors

          Drain-All comes in various configurations. For example, you can choose to install a counter to monitor and record the drainage volume. There are also high-pressure explosion-proof drainers for high-pressure systems, high-temperature explosion-proof drainers for high-temperature systems, rust-removing explosion-proof drainers for systems with much rust and impurities, super corrosion-resistant explosion-proof drainers for highly corrosive condensate, and vacuum explosion-proof drainers for vacuum systems, etc.

The parameters of Drain - All are as follows: Its maximum operating temperature is 76.7°C, the maximum liquid pressure is 51.7 bar, the minimum pressure of the control gas is 2.8 bar (Note: There seems to be a repetition here in the original text, "control gas's minimum pressure is 2.8 bar, control gas's minimum pressure is 9.0 bar", assuming it should be two different parameters or one of them is wrong), the minimum pressure of the control gas is 9.0 bar, both the inlet and outlet sizes are 1/2", the control gas size is 1/4", the balance pipe size is 1/8", the height, width and depth are 27.9 cm, 23.5 cm and 26.7 cm respectively, and the total weight is 9.5 kg.