Emulsion Splitting Equipment "ENVISOL®" is used to purify condensate with the use of emulsion splitting chemicals. It is strongly recommended that suitability testing is performed with us before selecting this device.

Emulsified condensate is treated by the chemicals in Emulsion splitting equipment.

The reaction/splitting chemical consisting of aluminum oxide (bentonite) splits emulsion to absorb oil molecules and to cover up the emulsion like a flocus. The components of the reaction/splitting chemical corresponds to PH 2 ~ 10 and therefore the oil contained in condensate, is properly separated. When the chemical is mixed with condensate in the stirred tank, the oil particles turn into a floccus form.

This process of Emulsion splitting equipment is repeated several times until all the oil is bonded. Aluminum oxide in the emulsion splitting chemical forms separate solid substances which are adhered to the filter bag and separated from water. The aluminum covering process continues inside the oil floccus extracted by the filter bag after settlement, and the risk of oil spillage is reduced over time.